Rumor: Macbook Pro Images Leaked

What's up with the holes?
Anticipation for a redesigned MacBook Pro circles the globe as rumors spread that Apple could be working on a new aluminum Pro with design features of the MacBook Air and current iMac. MacRumors.com may have uncovered a sneak preview of what the new MacBook Pro’s may look like… or maybe not. The source is Chinese-language blog, Apple.pro which published a photograph of what looks like a prototype of the upcoming redesigned notebook.
The photograph shows the top and bottom housings of the possible prototype side-by-side. Although similar to the MacBook Air, there are enough differences to rule out the possibility that this is simply a photograph of an Air’s casing. MacRumors.com notes for example, that the prototype’s Apple logo is not backlit and the screw configuration of the bottom case does not match the current Air’s casing. The Chinese article also claims that although the keyboard would be the same as in the MacBook Air, the battery for this laptop would be rectangular in shape rather than square.
Fake image made by an eager fan or the real thing? Although some legitimate leaks have come from Chinese sources, it’s good to keep in mind that anonymously leaked photos are more likely to be good fakes than the real thing.
![]()
benet
November 10, 2009 at 9:54pm
Were not smart, but also learn from others bald.omega watchesChing had no water to fish, one to the cheap is invincible.replica watchI left Dragon, White Tiger right shoulder tattooed Mickey Mouse.replica watchesEfforts should be made! ! For your Audi Dior me.zzay
![]()
Steve Jobs
July 07, 2008 at 2:50pm
It's obviously a fake. The top portion is bigger than the bottom!
![]()
jhill
July 07, 2008 at 12:25pm
looks like a macbook, spray painted with the rubber taken off the bottom
![]()
Brent D
July 07, 2008 at 11:45am
Just looks to me like the casing with no plastic or rubber parts attached. The Apple logo is likely still backlit, just the plastic translucent log is not affixed to the space yet. Makes sense to me...the holes are for the light and/or plastic nubs to stick through to collect light from the LCD. Holes on the bottom portion just look like where the rubber feet would be installed to me.


















