Rock a Righteous RAID in Your Mac Pro

Rock a Righteous RAID in Your Mac Pro

 

Step 4: Installus Interruptus

 

With all of your important files removed from the Mac Pro's original hard drive, insert the System Install disc that came with your Mac. Double-click the Install icon and follow the prompts, or simply restart your Mac and hold the C key to reboot from the disc. Once the menubar appears, select Utilities > Disk Utility and roll up your sleeves - it’s time to RAID.

 

Patience, Grasshopper. Starting from the Mac OS X Install disc is s-l-o-w.

 

6

Comments

+ Add a Comment
avatar

benet

Were not smart, but also learn from others bald.omega watchesChing had no water to fish, one to the cheap is invincible.replica watchI left Dragon, White Tiger right shoulder tattooed Mickey Mouse.replica watchesEfforts should be made! ! For your Audi Dior me.cef3

avatar

Anonymous

I can't seem to do this on my Feb 2008 Mac Pro. Do I need to first have the OS installed on an external drive or something? I can create the first striped array (even named it 'Ham'), but when I hit the '+' icon, and create the second array of striped drives, I can't drag the 3rd/4th drives over.

I can create a second set of striped drives, not using the '+' icon, but as a separate entity, and there doesn't appear to be a way to mirror the Ham array with it. I just wind up with two different arrays, and the OS can only be installed on one of them.

Thanks

avatar

Lou

Hello,
I installed 4 500gb drives last night in what I believe is a Raid 10,
it sounds like you didn't create the raid with all the drives in box, the have to arranged first then all created at the same time.
Here the Apple link that should help you.http://docs.info.apple.com/article.html?artnum=304377

Good Luck,
Lou

avatar

Will

You're right. According to a few articles, -one is here: http://www.miracleas.com/BAARF/RAID5_versus_RAID10.txt , the best hi perf raid to run is 10, which is in fact different from 0+1 http://www.bytepile.com/raid_class.php#10

avatar

iSean1

Reading your article I noticed that you striped Disk 1 and Disk 2 then striped Disk 3 and Disk 4 before mirroring the two striped volumes into a RAID volume.

I have seen performance tests that would indicate better performance may be achieved by mirroring Disk 1 and Disk 2 then mirroring Disk 3 and Disk 4 then striping the 2 mirrored volumes into a RAID volume.

What was the thought process on doing it the way you have outlined vs. the alternative method of mirroring then striping?

Would appreciate any insight into which is the better method and why.

avatar

iSean1

Sorry to post a reply to my own question but just trying clear up what I am asking a little. You list in your article that RAID 10 is a Mirror of Stripes, but isn't it in fact RAID 01 that is a Mirror of Stripes while RAID 10 is a Stripe of Mirrors?

The performance testing I have seen on RAID 01 (mirroring two sets of stripes) has been disappointing due to what would appear to be a flaw in Apples Software RAID which prevents i from performing stripe reads across a mirror.

From what I gather it has the same write speed and very little performance gain in read speed over RAID 10 (stripe of two sets of mirrors). This lack of performance gain combined with the fact that from what I understand is inferior fault tolerance seems to make it a poor choice over RAID 10 (striping two sets of mirrors).

That is what I am trying to figure out. What was the rationale for using/recomending RAID 01 vs. RAID 10?

Log in to Mac|Life directly or log in using Facebook

Forgot your username or password?
Click here for help.

Login with Facebook
Log in using Facebook to share comments and articles easily with your Facebook feed.