Forums | MacLife
You are not logged in.
#1 2008-05-27 3:01 am
- brummy23
- Member
- Registered: 2008-05-27
- Posts: 2
Powermac 7200/90
A friend at work has an old Powermac 7200/90 that he used at Uni many years ago. He has a lot of work on it and wants to connect it to the internet. He has run a cable from the router to the mac but it wont connect, is there any settings or anything else that we are missing.
Offline
#2 2008-05-27 7:53 am
Re: Powermac 7200/90
Make sure TCP/IP is set up correctly and turned on. Especially for the appropriate port you will be using. i.e. built in ethernet
Powerbook G3 Kanga
Macbook 2.4 C2D 2GB Leopard
Powerbook G4 1.67 2GB // 160 GB
Offline
#3 2008-05-27 11:52 pm
- dv
- Negusa Negest
- Moderator
- From: Minneapolis, MN
- Registered: 1999-08-30
- Posts: 18350
Re: Powermac 7200/90
Kill it with Fire.
Or do what this says:
http://www.cit.cornell.edu/computer/con … t/mac.html
Substituting your IP/DNS info, of course.
"Now commences the process of cutting off the head, which generally takes from an hour to an hour and a half by an expert workman with a sharp blade." -Reuben Delano, Wanderings and Adventures
Offline
#5 2008-05-29 1:16 pm
Re: Powermac 7200/90
dvpierce wrote:
Kill it with Fire.
Or do what this says:
http://www.cit.cornell.edu/computer/con … t/mac.html
Substituting your IP/DNS info, of course.
Can we dunk it in water to see if it's a witch?
Offline
#6 2008-05-29 4:59 pm
- Pariah
- James Carville Fan..
- From: Belly Of The Beast, Oklahoma!
- Registered: 2001-05-24
- Posts: 19079
Re: Powermac 7200/90
A few years ago I was offered 10 of those for free.
I declined.
But now the sun beats down on the asphalt land
Like a hammer invoked from God's left hand
What little still grows cringes in the shadows till the night fall...
Offline
#8 2008-05-30 5:46 am
- Pariah
- James Carville Fan..
- From: Belly Of The Beast, Oklahoma!
- Registered: 2001-05-24
- Posts: 19079
Re: Powermac 7200/90
dhack21 wrote:
To be honest... without grabbing a g3 upgrade for the 7200 its probably going to be dog slow on the net.
7200s are lousy upgrade candidates. One of the very worst PowerMacs evar.
But now the sun beats down on the asphalt land
Like a hammer invoked from God's left hand
What little still grows cringes in the shadows till the night fall...
Offline
#9 2008-05-30 8:44 am
- dv
- Negusa Negest
- Moderator
- From: Minneapolis, MN
- Registered: 1999-08-30
- Posts: 18350
Re: Powermac 7200/90
Seriously - G3 upgrade via PCI card. :shudder:
"Now commences the process of cutting off the head, which generally takes from an hour to an hour and a half by an expert workman with a sharp blade." -Reuben Delano, Wanderings and Adventures
Offline
#10 2008-07-10 8:19 pm
- ColourClassic
- Now in Colour
- From: OZ
- Registered: 2004-05-19
- Posts: 746
- Website
Re: Powermac 7200/90
I used to have a 7200/120. Was Dog slow. Even a 300Mhz Beige G3 runs like crap on my broadband.
Offline
#11 2008-07-10 10:23 pm
- dv
- Negusa Negest
- Moderator
- From: Minneapolis, MN
- Registered: 1999-08-30
- Posts: 18350
Re: Powermac 7200/90
Your broadband has nothing to do with it. 
"Now commences the process of cutting off the head, which generally takes from an hour to an hour and a half by an expert workman with a sharp blade." -Reuben Delano, Wanderings and Adventures
Offline
