Quantcast

Forums | MacLife

You are not logged in.

#1 2009-01-08 4:52 am

Taos
Satisficed
Registered: 2005-03-28
Posts: 47

Humdinger printer problem... AE and Samsung Laser

Hi all,

I have a Samsung CLP 300 and and Airport Express base station with a couple of powerbooks. Until recently the printer worked fine off the network but now it doesn't. I can't put my finger on what caused it, it could be going on holidays and turning everything off at the mains, or moving the network to a closed WPA2 personal protocol.

I have reinstalled the drivers, the printer works when connected through USB, it is seen the Airport Utility as being connected tot he base station, it appears as a bonjour printer but it still won't print... the status is always 'stopped'. I try and start them but they stop.

Can someone shine a little light on this for me?

Last edited by Taos (2009-01-08 4:53 am)


De do do do. De da da da.

Offline

 

#2 2009-01-08 8:52 am

Nefarious
Tuning Fork
Moderator
From: 45°22"N 84°57"W
Registered: 2002-09-30
Posts: 7998

Re: Humdinger printer problem... AE and Samsung Laser

Is your current user account an admin account ?

Try using a 2nd user account.   

We might end up deleting some preference files and trying again.

My bet is on the closed network possibility.   I had a hard time getting my airport + iphone right when I adjusted some password setting.

Offline

 

#3 2009-01-08 5:40 pm

D'Eyncourt
OMGDICTATOR
Registered: 2001-12-27
Posts: 8807
Website

Re: Humdinger printer problem... AE and Samsung Laser

I'm not sure if your network being closed is necessarily the problem, but you may as well disable this since it is of very little security consequence.

Every WiFi packet sent out has ID information which identifies which network it belongs to. This ID information contains the name of your WiFi in clear text, so while a closed network could stop beginners who are unaware of this fact anyone with bad intentions and a little learning (and have any number of readily available hacking tools) can get the name of your WiFi network. Of much more importance is the fact that you are using WPA2 to protect it. As long as you are using a sufficiently long password for WPA which isn't subject to a dictionary attack, you shouldn't bother with closing your network.


BOYCOTT SONY

"I think the question now is not whether you went to Vietnam or whether you didn't, whether you fought in the war or fought against the war. I think the only question is whether we can find a president smart enough never to make a mistake like that again"--Molly Ivins, way back in 1992

Offline

 

Board footer

Powered by PunBB 1.2.6
© Copyright 2002–2005 Rickard Andersson