Forums | MacLife

You are not logged in.

#1 2003-01-13 11:38 am

MaloGFX
Super Chapin
From: lacausa
Registered: 2002-12-10
Posts: 780
Website

XP Pro. problem....

I had some problems with XP, first I got a message saying Check Sum do you guys know what this is? and another problems was that it said something about the ATA slave was incompatible.


15" PowerBook SuperDrive, 1GB RAM, 60 GBs, Exter FW 60 GBs. 10.3.9
PC, AMD 64 3800 DualCore, 2.5GB RAM, HDs > 300, 300, 300, 250 GBs, 256mb PCIe 16X. Windows XP, Tiger 10.4.6.
PocketPC iPaq 4755, 4Gb CF, 3x 256MB SD Card, 4x 256MB and 1x 512MB CF Cards.

Offline

 

#2 2003-01-13 4:00 pm

HackerJax
Previous Poster
From: *unknown*
Registered: 2002-07-13
Posts: 4871

Re: XP Pro. problem....

I had some problems with XP, first I got a message saying Check Sum do you guys know what this is? and another problems was that it said something about the ATA slave was incompatible.

When did you get the checksum error? Usually that happens at boot time. The BIOS gets corrupted and you get a CMOS Checksum error.

I haven't seen XP display that itself.

Are you sure you aren't seeing the BIOS spit out errors during bootup?

-=Jax=-


http://i47.photobucket.com/albums/f184/HighDuck420/windows.gif

Offline

 

#3 2003-01-13 4:43 pm

MaloGFX
Super Chapin
From: lacausa
Registered: 2002-12-10
Posts: 780
Website

Re: XP Pro. problem....

I had some problems with XP, first I got a message saying Check Sum do you guys know what this is? and another problems was that it said something about the ATA slave was incompatible.

When did you get the checksum error? Usually that happens at boot time. The BIOS gets corrupted and you get a CMOS Checksum error.

I haven't seen XP display that itself.

Are you sure you aren't seeing the BIOS spit out errors during bootup?

-=Jax=-

Yes it was during boot time, I don't know what you mean by BIOS spit out errors during bootup. I don't know much about Windows operating system. Thanks again


15" PowerBook SuperDrive, 1GB RAM, 60 GBs, Exter FW 60 GBs. 10.3.9
PC, AMD 64 3800 DualCore, 2.5GB RAM, HDs > 300, 300, 300, 250 GBs, 256mb PCIe 16X. Windows XP, Tiger 10.4.6.
PocketPC iPaq 4755, 4Gb CF, 3x 256MB SD Card, 4x 256MB and 1x 512MB CF Cards.

Offline

 

#4 2003-01-13 4:52 pm

Ribtorus
Member
Registered: 2002-07-11
Posts: 13245

Re: XP Pro. problem....

Have you recently installed a hard drive, or has the ATA slave incompatibility message just shown up out of the blue?


It's not a movie.

Offline

 

#5 2003-01-13 6:27 pm

HackerJax
Previous Poster
From: *unknown*
Registered: 2002-07-13
Posts: 4871

Re: XP Pro. problem....

I had some problems with XP, first I got a message saying Check Sum do you guys know what this is? and another problems was that it said something about the ATA slave was incompatible.

When did you get the checksum error? Usually that happens at boot time. The BIOS gets corrupted and you get a CMOS Checksum error.

I haven't seen XP display that itself.

Are you sure you aren't seeing the BIOS spit out errors during bootup?

-=Jax=-

Yes it was during boot time, I don't know what you mean by BIOS spit out errors during bootup. I don't know much about Windows operating system. Thanks again

Ok. The problems you are describing don't sound XP related. It sounds like there is a problem before XP even boots up.

This isn't a windows issue. Its a hardware issue. The checksum error you are seeing is the computer telling you something is amiss. This is happening before windows loads.

What hardware have you recently changed?

-=Jax=-


http://i47.photobucket.com/albums/f184/HighDuck420/windows.gif

Offline

 

#6 2003-01-13 7:09 pm

Marathionman
Member
From: The land of Snow
Registered: 2001-10-31
Posts: 2045
Website

Re: XP Pro. problem....

Ok will I do not know what is wrong.  But to help the BIOS stans for basic Inout out sysetm.  And CMOS stands for complementary metal oxide semiconductor Pronounced SEE moss.  this is where the settings of the BIOS are stored.

Just some help.

Offline

 

#7 2003-01-14 12:03 am

MaloGFX
Super Chapin
From: lacausa
Registered: 2002-12-10
Posts: 780
Website

Re: XP Pro. problem....

I did something stupid. (duh!!!)

I installed a second harddrive, it wasn't reading the 2nd HD so I set the 2nd to slave, trying to install XP on the 2nd HD, I had a feeling it wasn't going to work like a Mac. So I didn't finish the installation, and when I tried to go back to my first HD it couldn't find the system, so I just repaired with the XP CD, and it was working fine. Now I get this messages. The 2nd HD is no longer plug in. and I did try to install XP with just the 2nd HD hooked up to the MOBO, and unplud the 1st HD. It is working now, but I will like to know what to do in the future. Thanks


15" PowerBook SuperDrive, 1GB RAM, 60 GBs, Exter FW 60 GBs. 10.3.9
PC, AMD 64 3800 DualCore, 2.5GB RAM, HDs > 300, 300, 300, 250 GBs, 256mb PCIe 16X. Windows XP, Tiger 10.4.6.
PocketPC iPaq 4755, 4Gb CF, 3x 256MB SD Card, 4x 256MB and 1x 512MB CF Cards.

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson