Forums | MacLife

You are not logged in.

#1 2007-11-16 10:25 pm

adamjg
Member
From: MD, USA
Registered: 2006-02-04
Posts: 749
Website

Powermac 9500 MP and OS X?

I acquired a '95 Powermac 9500 tower that had a Daystar Dual 250 MHZ MP 604e card installed. I'm curious to know how well that would work with OS X, using XPostFacto. Anyone use one of these?

Offline

 

#2 2007-11-17 7:41 am

dvpierce
Negusa Negest
Moderator
From: Minneapolis, MN
Registered: 1999-08-30
Posts: 16888

Re: Powermac 9500 MP and OS X?

You'd be the first I'd heard of trying.

From the XPostFacto site on OWC.

Mac OS X 10.3 (and later) require a G3 or G4 CPU upgrade on models that did not originally come with a G3 or G4.

The 9500MP and 9600MP work, but only one processor is active.

So, that would be a deal killer, methinks.

Maybe some variety of Linux will give you multi-processor goodness?


"Now commences the process of cutting off the head, which generally takes from an hour to an hour and a half by an expert workman with a sharp blade." -Reuben Delano, Wanderings and Adventures

Offline

 

#3 2007-11-17 8:51 am

adamjg
Member
From: MD, USA
Registered: 2006-02-04
Posts: 749
Website

Re: Powermac 9500 MP and OS X?

I have original X 10.1 disks too. I wonder if those would do better for this, since I don't have a CPU upgrade? I haven't really gotten into Linux though.

Last edited by adamjg (2007-11-17 8:54 am)

Offline

 

#4 2007-11-20 1:19 pm

pkmgarf
Member
From: Sussex, WI
Registered: 2007-06-13
Posts: 459

Re: Powermac 9500 MP and OS X?

It's too bad that only one processor works.  I think X on a single 250mhz would be problematic....

Offline

 

#5 2007-11-20 2:09 pm

adamjg
Member
From: MD, USA
Registered: 2006-02-04
Posts: 749
Website

Re: Powermac 9500 MP and OS X?

And is it even capable of running a 604 PPC CPU? I also have 300 MHZ from a 9600 I wondee if that would be better, but it's still a 604 or 604e.

Offline

 

#6 2007-11-21 6:00 am

Alien
FF
Administrator
From: Republic of Amsterdam
Registered: 1999-07-05
Posts: 16579
Website

Re: Powermac 9500 MP and OS X?

dvpierce wrote:

Maybe some variety of Linux will give you multi-processor goodness?

BeOS!

pkmgarf wrote:

It's too bad that only one processor works.  I think X on a single 250mhz would be problematic....

A 250 MHz 604e would comfortably hold its own against a 233 MHz G3. And plenty of people (have) run OS X on that.

,xtG
.tsooJ

Offline

 

#7 2008-02-26 1:43 pm

decker
Screamin' Otter
From: N42°21.441' W88°01.480'
Registered: 1999-07-08
Posts: 3743
Website

Re: Powermac 9500 MP and OS X?

I'm not sure running on one processor would be that big of deal.  I don't know about this specific upgrade card, but wasn't most stuff asymmetric multi-processing then?

Also, make sure you have plenty of RAM.  -I'm sure that goes without saying, but I also recall something about the 9500's not recognizing both processors if virtual memory was being used.

Offline

 

Board footer

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson