Forums | MacLife
You are not logged in.
#1 2005-05-09 8:18 pm
- macmind
- Member
- Registered: 2005-05-09
- Posts: 2
Firewire Target disk through a PCI card?
G4 Sawtooth - The on board Firewire quit. I replaced it with an aftermarket PCI card. The system profiler sees it. BUT: I can't access Target disk mode. I'm told this only works via built-in Firewire.
WORSE: I can no longer use Firewire to network the computer (the Firewire port won't mount). Is this a PCI card address issue?
Offline
#2 2005-05-10 1:20 am
- reece_james
- TheLAD
- From: Wollongong, Australia.
- Registered: 2001-12-01
- Posts: 3790
- Website
Re: Firewire Target disk through a PCI card?
Target Disk mode wont work and some PCI cards will *blowup or disable if you try and create a FW network.
*Lots of smoke and acid smell but not damaging to the machine.
Reece [/IMHO]
"All posts on the internet are postfixed by an invisible 'IMHO'", tito
Intel iMac CD 1.83Ghz, 2GB RAM, 17" + 20", 1160GB HD, 10.5.2.
MacBook CD 1.83Ghz, 2GB RAM, 60GB HD, 10.5.2.
Offline
#3 2005-05-11 12:54 pm
- macmind
- Member
- Registered: 2005-05-09
- Posts: 2
Re: Firewire Target disk through a PCI card?
not what I wanted to hear
but - is there a motherboard repair?
Offline
#4 2005-05-11 4:45 pm
- NightCougar_37
- For Gallia!!
- From: The back of my Twilight Drake
- Registered: 2001-07-22
- Posts: 9142
Re: Firewire Target disk through a PCI card?
Could try to just replace your board. ebay would have sawtooth boards.
Offline
© 2008 Future US, Inc. All Rights Reserved.